Introducing - SM Series Operator & Workstation ESD Monitor
Monitor Features:
·Audible and visual status indicators
·Bad connection from monitor to remote indication
·Typical wrist-strap operator voltage: 200 mV
·Maximum mat (soft ground) voltage: 900 mV
·Maximum tool (hard ground) voltage & current: 50mV & 0.2 mA
·Two years unconditional warranty
Electrical Specifications:
Wrist-strap resistance alarm limit: Low Alarm <1.8 MOhm series resistance.
High Alarm > 10MOhm series resistance. Other alarm limits available.
Maximum wrist-strap operator voltage: 0.9 V under wrist strap open fault conditions.
Mat (soft ground) resistance alarm limit: High Alarm > 3.5 MOhm series resistance. Other alarm limits available.
Maximum mat (soft ground) voltage: Less than 1 V even under fault conditions
Tool (hard ground) resistance alarm limit: High Alarm > 10 Ohm series resistance. Other alarm limits available.
Maximum tool (hard ground) voltage: Less than 0.05 V even under fault conditions
Maximum tool (hard ground) current: Less than 0.2 ma
Power supply: 7-12V DC 150 ma
Mechanical Specifications:
·Dimensions:
·Width: 4 in,
100 mm
·Height: 1 in,
25 mm
·Length: 3 in,
75 mm
·Monitor Case
Material:
Stainless steel
·Included
Monitor Accessories:
Two remote operator jacks with 10’ cords; 3 or 5-position disconnect plug
for connecting Mat, Tool, and Reference ESD GND
Tel: 408 607-0855
Fax: 408 778 2138
Email: 
